Using Yamaha Tabletop/Puck Microphones

How to Steps

  1. If the microphones are not already distributed, place them in the desired locations around the room. These microphones can send audio to the room speakers and any recording being done.
  1. Initially, the microphone is muted, indicated by the red LED's. To unmute the microphone, tap on a red microphone LED, and the lights will turn green, indicating that the microphone is now live.

 

 

 

 

 

 

 

 

 

  1. These microphones are initially muted at the podium, even if the LED's are green. To enable the microphones in the room, ensure the Table button is white. If the Table button is red with a slash, the microphones are muted, as shown below.

              

  1. Once the Table icon is unmuted, students will be able to use the mics throughout the room. Audio from active microphones will be captured in the classroom recording if the lecture is set to be recorded.
  1. The microphones can be used with the Table mute button activated, but the audio will only go to the recording and not be played through the speakers in the room.
  1. When done with the microphones, reconnect them to the docking stations or charging cables at the tables.

     
Print Article